Відео

I would replace the shell at that point

What if you just change the bulb with higher lumens? Rather replacing the (resistor)?

Awful audio

Turn clockwise or anticlockwise?

Thats crazy! So I can use any old hifi vhs thing to do this?

Can you show us the schematic diagram.

Did you use a capacitor

it seems that on my thomson cd player the potentiometer is not accessible. but I'm a beginner so chances are I'm just not finding. Any hints? There's only screws holding the pieces together it seems.

DVD sounds more compressed. VHS wins.

Did this a lot in high school. My vhs deck had such a nice roll off and warmth in the low end!

"I have a Samsung like that as well, but I can only get the red light at the bottom to turn on. This happened after I connected the TV to 110V. It worked normally, but then the picture froze, and after that, it wouldn't turn on anymore and there's no sound either."

the fact your wearing gloves tells me your an amateur

That worked! I bought annold but very high end player. Tested it, worked. Came home, didn’t work anymore. I guess the car ride was the final straw. Bumped up the laser voltage just a tiny bit: works perfectly now! Thanks for this tip!

Awesome! So how do I set my multimeter? I’m a newbee

please share schematic "mines dead"

Thanks for your video

Nice job on this video. I actually don’t have power so maybe I have more issues. But I am going to do what you just did and see if that can do it. Thank you.

I fixed my TV because of this video. Thank you!

At 2:50 in “trimmer pots for the laser diode.” Nice! After watching 3 other videos this fixed my Sony CDP-211 - thanks!!

my samsung tv won't turn on red light blinking all the time , but when i unplug the one connect cable my tv turns on that i have to plugin the cable , do you think its the same problem in your video or do you think it's the samsung one connect box next to my tv ?

THANK YOU SO MUCH!!! I have ZERO experience in these kind of things and I could fix my discman all thanks to you!!!😭😭😭 It wasnt hard AT ALL, now I can listen to my taylor swift cds😭😭

My rotary belt had come off. I put it back on and ordered a replacement in case it breaks. The error message, just said ERROR and it sounded like something was just spinning. I am amazed such a little rubber belt turns the whole tray around! Thank you for saving my 20 year old disc player!!!!

Thanks! This was AMAZING. My rotary belt had come off! Put it back on and it worked!!! Ordered a replacement on Amazon if it breaks.

In my aiwa XP-V731 I can't remove the screws. Some idea?😅

It is normal that power on off 3.2V be? With the main board it is 3,2v and wothout it connected it is 3,8v. Is that normal?

mine just stopped charging after it discharged completely on using. after failed attempts to charge it i discovered two cells have completely no charge and are behaving like they are shorted coz power seems to flow from the ones next to them just through them like they are just conductors. the battery is the 18v core pro 12ah type. any advice for boss

I have those excat lights all 16 are very bright

I replaced the main board and it was still broken. But the guy who sold me the part told me to take the wide white cable out of the main board (as this is the cable to the display panel) and see if your TV turns on. My TV was constantly power cycling with a black and blue screen. I removed the white cable, turned the TV on and I heard audio from my TV. Do this step before you buy any new parts. If your tv turns on after removing the cable for the display panel then it’s the panel itself that’s broken, everything else is working. Not too sure if it’s worth replacing the panel though, maybe if you can find a cheap one, but I found it too hard to find.. Might just have to buy a new TV, or buy a 2nd hand one of the exact same model and move your main board to the new TV, so that you retain all the saved data.

Hi . I did encounter this 'not opening' of the tray with a Philips CD dvd playher /recorder and noticed that it has no problem opening when a cd or dvd is left in it when turning it off for the next time using it . At the local repairshop I was told that the magnet centering the discs is too strong . That is maybe sounding a little strange because normally ( in my expeience anyway )magnets are getting weaker over time . Maybe somebody can clear this out and even has a solution to possibly fix this ?

Hi, I have an Un48J5570, it does not turn on and if i try to unplug the cable on the mainboard, there aren't any lights.. The tv seems completly dead, is there anything i can do? Are there lights on every Samsung TV? Thx

Bought the same unit 24 years ago. Recently I transported with a disk, came loose inside And jammed, since then, it's not working correctly. Will try the steps in your video. Are the belts for the c? D drive very specific or generic. Greatly appreciate your tutorial.Gave you a thumbs up and Is subscribed. Paid about $400 or so back in 2000 I figure it's gonna cost around 1500 to get the same sound quality. Thanks again for your help

Would it be a belt or alignment problem if the tray keeps opening and closing on its own? Mine does that repeatedly. Sometimes it will sort of slam open. It will usually close and play after a while or after I mess around with pushing buttons.

Rarely does a UA-cam video save me 200 dollars. Sincere thanks for this video. Have a good day!

How how do u know if there Greece can u feel it like Bruning out side when u put the lid back?

Hello, thank you for your good video. I also have a Sony DVD player that has a loading problem and it stays in the same state. I think you rotated it a little instead of changing the optics. I am from Iran.❤

This guy makes sence others don't, Massive Respect keeping it simple knowledge is power...

Is it possible to add a heads up display to an 89 se, that didn't come with one from the factory? Thanks nice video.

So if it still don't work after all this then it's the speaker thats bad huh..i tried everything you did but still no sound..only thing I didn't use was what you used to clean the spots but I did try the round piece on another gameboy so It might not be just a bad connection

Hi, great vid! I lost the charger but have a 4 pin alko (+, Bs,Tv , -) output 10.8 - 20V. Can I pin up the batt to this to charge bosch gba 18v 6ah batt? Yes... batt has 5 conn and charger only 4... dont want to break battery ;-) possible? Thx Lis

sony cdp-ce500 5-disc repair. Take tray off and there is another optic switch. Clean that also.

Thanks for the video. I have the exact same unit you have. I did what you said to do about increasing the voltage the laser and it worked perfectly. I did not mark as you requested to do before turning the switch clockwise but used the notch on top to use as guidance. I used a box cutting blade to turn the switch. My question is where can I find another replacement unit that you removed from the DVD player. I have looked online an been unable to find. Thanks for everything I appreciate it.

Also, sometimes you can get the laser assembly which doesn't cost much

चल नहीं रहा है तो उठाकर कचरे के डिब्बे में फेक दो लेसे भी ये घटिया products ha kuch kam ka nahe ha company ko theek bana na bhi nahe atta ha

Greetings, can you repair my 18 batteries?

Hey i am going to try that fix on my two older dvd players. One plays dvd's but stops and pauses a lot the other won't recognize a dvd. I seen your other three year ago video with the Curtis dvd player that had two laser readers. Thanks for the video and info.

سبحان ألله وبحمده سبحان الله العظيم سبحان الله وبحمده سبحان الله العظيم

12:32... very cool! And I am capable of doing this, but I need to understand the parameters of these components, or I need the "answers sheet" that just says "get these exact parts, and they will work together." Also, my property is very shaded by foliage. I really want to create small independent groups of daisy-chained solar powered lights like these to mitigate my limited sunlight exposure on my property to save money on my power bill- I want the light for the safety of anyone walking to my front door. Very easy to trip or hurt oneself if they cannot see the ground in front of them. Hmm...Last comment was 4years ago... anybody still active here? Any suggestions would be great. Thanks for the video, I'm going to see what others you have- maybe you have more details in them that I can use for this.

Hacer eso es una aberracion, esta cambiando los parametros de fabrica y el laser se termina agotando, ahi hay que revisar los servos y sus componentes, esa es la facil de los estafadores que hacen andar nuevamente una maquina sin trabajar y arruinando definitivamente el laser, esto deberia estar prohibido en youtube, es desinformacion y engaño.

This is pretty much what a joule thief is.

Stick it a window and make a solar night-light.